|Net Weight:||2.7kg||Installation:||Pole-mounting /Wall-mounting/Aerial|
|Cable Diameter:||Φ7~Φ22||Splice Tray:||24 Single Fiber|
fiber optic splice enclosure,
fiber optic cable joint closure
24 Cores Max Splitter Fiber Closure 4 IN 4 OUT Hot Melt Sealing
SPFC-PV-XXH-4/4C is a into six out type heat sealing cap type optical fiber cable connector box, suitable for Ф 7 -Ф 22 cable in and out, is suitable for aerial, wall-mounting applications, Pole-mounting ,differences in place.The box body and the base are sealed with the silicone rubber. The cable seal is sealed with a heat shrinkable tube.
● The fiber optic splice closure consists of cover,pedestal,splice tray,hoop,optical cable storage box.
● The cable entry ports are sealed with heat shrinkable tube.
● This is single fiber splice closure, it provide with one elliptical port and 6 round ports.The elliptical port, which can hold two stick optical cables.
● The case body is made from imported high-intensity engineering plastics(PP) and formed the shape with mould plastics under high pressure. ● ● With the advantages of less weight, high mechanical intensity, corrosive-resistance, anti-thunderstruck and long service life.
● Equipped with air - core and installation
● It can be installed with 1x16/1x32 tube type PLC shunt and 18 /36 SC adapters.
|Cable ports||One elliptical port and 6 round ports.|
|Way to install||
Pole-mounting /Wall-mounting/Aerial installation; Wall-mounting
|Capacity of splice tray||24 single fiber|
|Sealing structure||Heat shrinkable sealing structure silicon gum material|
|Max. Number of Trays||4|
|Max Capacity||96 single fiber；|
|Max splitting||1:32(1pc)PLC；1:16(2pc)PLC ;18/36 SC adapters|
|Work Temperature||-40 °C ~+60°C|
|Voltage resistance strength||15 kv dc, 1 minute no breakdown, no flash over phenomenon.|
|Sealing||inflatable make the internal pressure of 100 kpa, into the water to observe more than 15 min, airless bubble generation, air pressure is not falling.|
|Impact strength||impact energy under16N.m, impact times for 3 times, no cracks|
|SPFC-PV-24H-4/4C||Fiber Closure Vertical type support Splitter 24 Cores Max , 24 Cores Splice Tray 4 IN 4 OUT Hot melt sealing without Splitter,support 1:32/1:16(2PCS) type C||φ230*440mm||
|SPFC-PV-48H-4/4C||Fiber Closure Vertical type support Splitter 48 Cores Max , 24 Cores Splice Tray 4 IN 4 OUT Hot melt sealing without Splitter,support 1:32/1:16(2PCS) type C||φ230*440mm|
|SPFC-PV-72H-4/4C||Fiber Closure Vertical type support Splitter 72 Cores Max , 24 Cores Splice Tray 4 IN 4 OUT Hot melt sealing without Splitter,support 1:32/1:16(2PCS) type C||φ230*440mm|
|SPFC-PV-96H-4/4C||Fiber Closure Vertical type support Splitter 96 Cores Max , 24 Cores Splice Tray 4 IN 4 OUT Hot melt sealing without Splitter,support 1:32/1:16(2PCS) type C||φ230*440mm|