|
Product Details:
|
|
| Brand Name: | Sopto |
|---|---|
| Certification: | ISO9001 / CE / RoHS |
| Model Number: | SPT-PB2733TG-LXX |
|
Payment & Shipping Terms:
|
|
| Delivery Time: | 3-5 working days |
| Payment Terms: | T/T; L/C; Paypal |
|
Detail Information |
|||
| Transmission Distance: | 10 / 20 / 40 / 40 / 80km | Wavelength: | 1270nm&1330nm Or 1490nm&1570nm |
|---|---|---|---|
| Data Rate: | 10Gb/s | Fiber Type: | Single Fiber Single Mode |
| Interface: | Simplex LC | Application: | 10GBASE-SR/LR/ER/ZR Ethernet |
| High Light: | fiber sfp module,fiber optic sfp module |
||
Product Description
10G BIDI SFP+ Transceiver Modules up to 80km Simplex LC Interface with DDM Function
10G BIDI SFP+ transceiver modules are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by usually using 1330(1270nm) transmitter and 1270(1330) nm receiver. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell, etc.) compatible fiber optic transceivers.
Features
● Simplex LC Interface
● Built-in digital diagnostic functions
● 1270nm&1330nm or 1490nm&1570nm
● Up to 11.3 Gbps Bi-directional Data Links
● Single Fiber Bi-Di SFP+ Optical Transceiver
● Transmission distance up to 80km over SMF
● Operating Case Temperature: Standard: 0~70°C; Extended: -20~85°C; Industrial: -40~85°C
Compliant
● RoHS-6
● SFF-8472
● SFP+ MSA
● IEEE 802.3ae 10GBASE-BX or SDH/SONET standards
Sopto fiber optic transceiver took the first lead to pass the ISO9001 quality system, the requirements of European CE, RoHS.
Pin Descriptions
Figure1.Elecctrical Pin-out Details
| Pin | Symbol | Name/Description |
| 1 | VEET [1] | Transmitter Ground |
| 2 | Tx_FAULT [2] | Transmitter Fault |
| 3 | Tx_DIS [3] | Transmitter Disable. Laser output disabled on high or open |
| 4 | SDA[2] | 2-wire Serial Interface Data Line |
| 5 | SCL[2] | 2-wire Serial Interface Clock Line |
| 6 | MOD_ABS[4] | Module Absent. Grounded within the module |
| 7 | RS0[5] |
RS0 for Rate Select: Open or Low = Module supports ≤4.25Gbps High = Module supports 9.95 Gb/s to 10.3125 Gb/s |
| 8 | RX_LOS[2] | Loss of Signal indication. Logic 0 indicates normal operation |
| 9 | RS1[5] | No connection required |
| 10 | VEER[1] | Receiver Ground |
| 11 | VEER[1] | Receiver Ground |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled |
| 13 | RD+ | Receiver DATA out. AC Coupled |
| 14 | VEER[1] | Receiver Ground |
| 15 | VCCR | Receiver Power Supply |
| 16 | VCCT | Transmitter Power Supply |
| 17 | VEET [1] | Transmitter Ground |
| 18 | TD+ | Transmitter DATA in. AC Coupled |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled |
| 20 | VEET [1] | Transmitter Ground |
Notes:
1. Module circuit ground is isolated from module chassis ground within the module.
2. should be pulled up with 4.7k – 10k ohms on the host board to a voltage between 3.15Vand 3.6V.
3. Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.
4. Mod_ABS is connected to Veet or VeeR in the SFP+ module. The host may pull this contact up to Vcc_Host with a resistor in the range of 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP+ module is physically absent from a host slot.
5. RS0 and RS1 are module inputs and are pulled low to Veet with > 30 kΩ resistors in the module.
Recommended Interface Circuit
Figure2. Host Board-Power Supply Filters Circuit
Figure3. Host-Module Interface
Mechanical Dimensions
A : LC Receptacle
B : SC Receptacle
All-optical transceivers are RoHS compliant and could be 100% compatible with branding equipment, such as Cisco, Extreme, Juniper, HP, H3C, Linksys, Huawei, Alcatel-Lucent, Foundry, Nortel, Force10, etc.
If you want to know more about the exact information of the specified transceiver or get the price
Applications
● SONET OC-192 / SDH STM-64
● OTN ITU-T G.709
● 10GBASE-SR/LR/ER/ZR Ethernet
● 10X/8X/4X/2X/1X Fibre Channel
Ordering Informations
| Products |
Data Rate(Gbps) |
Distance | Fiber |
Output Power(dBm) |
Sensitivity(dBm) |
Interface | Temp. | DDM |
|
SPT-PB2733TG-L10/ SPT-PB3327TG-L10 |
9.95~11.3 | 10km | SM | -6～-1 | -14.5 | Simplex LC | 0-70℃ | D |
|
SPT-PB2733TG-L20/ SPT-PB3327TG-L20 |
9.95~11.3 | 20km | SM | -3～-2 | -14.5 | Simplex LC | 0-70℃ | D |
|
SPT-PB2733TG-L40/ SPT-PB3327TG-L40 |
9.95~11.3 | 40km | SM | 0～5 | -16 | Simplex LC | 0-70℃ | D |
|
SPT-PB2733TG-L60/ SPT-PB3327TG-L60 |
9.95~11.3 | 60km | SM | 1～5 | -22 | Simplex LC | 0-70℃ | D |
|
SPT-PB47TG-L80/ SPT-PB74TG-L80 |
9.95~11.3 | 80km | SM | >1 | -22 | Simplex LC | 0-70℃ | D |
Enter Your Message
| Shenzhen Sopto Technology Co., Ltd |
| 2nd Floor Building D Huafeng International Robot Industrial Park, Baoan District Shenzhen |
| 86-755-23018340 |
| sales@sopto.com.cn |
