Shenzhen Sopto Technology Co., Ltd

10G CWDM SFP+/ XFP Fiber Optic Transceiver Single Mode With LC Interface

Product Details:
Brand Name: Sopto
Certification: ISO9001 / CE / RoHS
Payment & Shipping Terms:
Packaging Details: 10 pcs/plate; 0.024kg/pcs
Delivery Time: 3-5 working days
Payment Terms: T/T; L/C; Paypal
  • Detail Information
  • Product Description

Detail Information

Fiber Type: Single Mode Interface: LC
Power Supply: Single +3.3 V Operating Temperature: Commercial 0 To 70 Industrial -40 To 85
Transmission Distance: 10km - 80km Certification: ISO9001 / CE / RoHS
High Light:

sfp transceiver single mode

,

fiber optic sfp module

Product Description

10G CWDM SFP+/XFP Transceiver Modules with Built-in Digital Diagnostic Functions

 

10G CWDM SFP+/XFP transceiver modules are small form factor pluggable module for serial optical data communications. It is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are 18 center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 14 dB is offered. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

 

Product Features

 

● Single +3.3 V Power Supply

● Built-in digital diagnostic functions

● 2G/4G/8G/10G Fibre Channel compliance

● Transmission distance up to 80km over SMF

● Power Budget up to 10dB, 14dB, 16dB, 23 dB

● Supports Multi-Protocol 8.5Gb/s, 9.95Gb/s to 11.3Gb/s bit rates

● Class 1 Laser International Safety Standard IEC-60825 Compliant

● Uncooled 18-λ CWDM DFB/cooled EML LD: from 1270 nm to 1610 nm

● Can be used with single-fiber CWDM system or dual fiber CWDM system

● Operating Case Temperature: Standard: 0~70°C; Extended: -20~85°C; Industrial: -40~85°C

 

Compliant

 

● RoHS-6

● IEEE 802.3ae 10GBASE

● SFF-8431, SFF-8432, SFF-8472

Sopto fiber optic transceiver took the first lead to pass the ISO9001 quality system, the requirements of European CE, RoHS

transceiver certificate.png

 

 

Pin Assignment

 

Diagram of Host Board Connector Block Pin Numbers and Name.

 

Pin Assignment.png

Pin Function Definitions

 

PIN Name Function Notes
1 VeeT Module transmitter ground Note 1
2 Tx Fault Module transmitter fault Note 2
3 Tx Disable Transmitter Disable; Turns off transmitter laser output Note 3
4 SDL 2 wire serial interface data input/output (SDA)  
5 SCL 2 wire serial interface clock input (SCL)  
6 MOD-ABS Module Absent, connect to VeeR or VeeT in the module Note 2
7 RS0 Rate select0,optionally control SFP+ receiver. When high, input data rate>4.5Gb/ s;when low, input data rate <=4.5Gb/s  
8 LOS Receiver Loss of Signal Indication Note4
9 RS1 Rate select0,optionally control SFP+ transmitter. When high, input data rate >4.5Gb/s;when low, input data rate <=4.5Gb/s  
10 VeeR Module receiver ground Note 1
11 VeeR Module receiver ground Note 1
12 RD- Receiver inverted data out put  
13 RD+ Receiver non-inverted data out put  
14 VeeR Module receiver ground Note 1
15 VccR Module receiver 3.3V supply  
16 VccT Module transmitter 3.3V supply  
17 VeeT Module transmitter ground Note 1
18 TD+ Transmitter inverted data out put  
19 TD- Transmitter non-inverted data out put  
20 VeeT Module transmitter ground Note1

 

Note 1. The module ground pins shall be isolated from the module case.

2. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board.

3. This pin shall be pulled up with 4.7K-10Kohms to Vcc in the module.

4. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board.

 

SFP Module EEPROM Information and Management

 

The SFP modules implement the 2-wire serial communication protocol as defined in the SFP -8472.

The serial ID information of the SFP modules and Digital Diagnostic Monitor parameters can be accessed through the I2C interface at address A0h and A2h. The memory is mapped in Table 1. Detailed ID information(A0h) is listed in Table 2. And the DDM specification at address A2h. For more details of the memory map and byte definitions, please refer to the SFF-8472, “Digital Diagnostic Monitoring Interface for Optical Transceivers”. The DDM parameters have been internally calibrated.

 

Table 1. Digital Diagnostic Memory Map (Specific Data Field Descriptions)

 

Specific Data Field Descriptions.png

 

 

Table 2. EEPROM Serial ID Memory Contents (A0h)

 

Data Address Length (Byte) Name of Length Description and Contents
Base ID Fields
0 1 Identifier Type of Serial transceiver (03h=SFP)
1 1 Reserved Extended identifier of type serial transceiver (04h)
2 1 Connector Code of optical connector type (07=LC)
3-10 8 Transceiver  
11 1 Encoding NRZ(03h)
12 1 BR,Nominal Nominal baud rate, unit of 100Mbps
13-14 2 Reserved (0000h)
15 1 Length(9um) Link length supported for 9/125um fiber, units of 100m
16 1 Length(50um) Link length supported for 50/125um fiber, units of 10m
17 1 Length(62.5um) Link length supported for 62.5/125um fiber, units of 10m
18 1 Length(Copper) Link length supported for copper, units of meters
19 1 Reserved  
20-35 16 Vendor Name SFP vendor name: SOPTO
36 1 Reserved  
37-39 3 Vendor OUI SFP transceiver vendor OUI ID
40-55 16 Vendor PN Part Number: (ASCII)
56-59 4 Vendor rev Revision level for part number
60-62 3 Reserved  
63 1 CCID Least significant byte of sum of data in address 0-62
Extended ID Fields
64-65 2 Option

Indicates which optical SFP signals are implemented

(001Ah = LOS, TX_FAULT, TX_DISABLE all supported)

66 1 BR, max Upper bit rate margin, units of %
67 1 BR, min Lower bit rate margin, units of %
68-83 16 Vendor SN Serial number (ASCII)
84-91 8 Date code SOPTO’s Manufacturing date code
92-94 3 Reserved  
95 1 CCEX Check code for the extended ID Fields (addresses 64 to 94)
Vendor Specific ID Fields
96-127 32 Readable SOPTO specific date, read only
128-255 128 Reserved Reserved for SFF-8079

 

Mechanical Dimensions

 

图片1.png

 

All-optical transceivers are RoHS compliant and could be 100% compatible with branding equipment, such as Cisco, Extreme, Juniper, HP, H3C, Linksys, Huawei, Alcatel-Lucent, Foundry, Nortel, Force10 etc.

 

Applications

 

● SONET OC-192 / SDH STM-6

● OTN ITU-T G.709

● 10GBASE-SR/LR/ER/ZR Ethernet

● 10X/8X/4X/2X/1X Fibre Channel

● CWDM Networks

CWDM.png

 

Ordering Information

 

PN Data Rate(Gbps) Distance Fiber Output Power(dBm) Sensitivity(dBm) Interface Temp. DDM
CWDM SFP+
SPT-PC(27-61)TG-LR 9.95~11.3 10km SM -40 -14 Duplex LC 0-70 D
SPT-PC(27-33/47-61)TG-LRS 9.95~11.3 20km SM -5-1 -17 Duplex LC 0-70 D
SPT-PC(21-33/47-61)TG-ER 9.95~11.3 40km SM -13 -17 Duplex LC 0-70 D
SPT-PC(47-61)TG-ZR 9.95~11.3 80km SM 04 -23 Duplex LC 0-70 D
CWDM XFP
SPT-XC(27-61)TG-LR 9.95~11.3 10km SM -40 -14 Duplex LC 0-70 D
SPT-XC(27-33/47-61)TG-LRS 9.95~11.3 20km SM -5-1 -17 Duplex LC 0-70 D
SPT-XC(21-33/47-61)TG-ER 9.95~11.3 40km SM -13 -17 Duplex LC 0-70 D
SPT-XC(47-61)TG-ZR 9.95~11.3 80km SM 04 -23 Duplex LC 0-70 D

 

Get in touch with us

Enter Your Message

You Might Be Into These