Shenzhen Sopto Technology Co., Ltd

24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop

Product Details:
Model Number: SPFC-PH-XXM-4/4E
Payment & Shipping Terms:
Packaging Details: 500*510*58/8PCS; 28.5KG/8PCS
  • Detail Information
  • Product Description

Detail Information

Net Weight: 3.5kg Size: 470(L)*240(W) *120 (H) Mm
Installation: Aerial, Duct And Buried Cable Diameter: ∅10-∅22
Max Capacity: 36 Cores Single PLC Splitter Capacity: 1:32/2:16 Max
High Light:

fiber optic splice enclosure

,

fiber optic cable joint closure

Product Description

 

24 Cores Splitter Fiber Closure 4 IN 4 OUT Mechanical Splicing

 

The product provide with 8 fiber cable in-out round ports and the cable diameter is from Ф10-Ф22. It can be used in aerial, duct and direct buried application. This product is made from the high-quality and with the mechanical sealing structure filled with the sealing material. The external component and fastening piece are all made from the high-quality stainless steel. It can be opened after sealing.

 

 

24 Cores Splitter Fiber Optic Cable Joint Closure For Telecommunication Subscriber Loop 0

 

Applications

 

● Telecommunication subscriber loop

● Fiber to the home(FTTH)

● LAN/WAN

 

Specification

 

 Item  Parameter
 Type  SPFC-PH-XXM-4/4E
 External Size  470(L)× 240(W) × 120 (H) mm
 Net weight  3.5kg
 Cable ports  four cable entry port on each end
 Way to install  Aerial, duct and buried applications
 Cable diameter

 ∅10-∅22

 Capacity of splice tray  24 single fiber
 Max Capacity of Splice Tray  8
 PLC Splitter Capacity  Optional support 1:32/2:16 Max type E
 Sealing structure  Sticky cincture
 Work Temperature  -40°C ~+70 °C
 Optical fiber winding radius  ≥40mm
 Extra loss of fiber tray  ≤ 0.01dB
 Fiber length left in tray  ≥1.6m
 Max Capacity  Fiber capacity: single:36cores
 Lateral pressure-resistance  ≥2000N / 10cm
 Shock-resistance  ≥20N.m

 

Operations

 

Choose the cable loop with proper outer diameter and let it go through the optical cable. Peel the cable , take off the outer and inner housing, as well as loose contract tube, and wash off the filling grease, leaving 1.1~1.6mfiber and 30~50mm steel core.

Fix the cable pressing card and cable, together with cable reinforce steel core. If the diameter of the cable is less than 10mm, first bind the cable fixing point with adhesive tape till the diameter has reached 12mm, then fix it.

Lead the fiber into the melting and connecting tray, fix heat contract tube and heat melt tube to one of the connecting fiber. After melting and connecting the fiber, move heat contract tube and heat melt tube and fix the stainless (or quartz)reinforce core stick ,make sure the connecting point is in the middle of the housing pipe. Heat the pipe to make the two into one. Put the protected joint into the fiber-laying tray.(one tray can lay 12 cores)

Lay the left fiber in the melting and connecting tray evenly, and fix the winding fiber with nylon ties. Use the trays from the bottom up. After all the fiber has been connected, cover the top layer and fix it.

Position it and use the earth wire in accordance with the project plan.

Sealing the cable retainer nearing the inlet of splice closure and the joint of the cable rings with sealing tape. And close the unused inlets with plugs, with exposed concave parts of the plug sealed with tapes. Then put sealing trips into the sealing groove on the sides of the shell and grease the concave part of inlet of the body between the two parts of the shell. Then close the two parts of the shell and tighten it with stainless steel bolts. The bolts should be screwed tightly with balanced force. according to the laying requirement, position and fix the hanging tool .

 

Ordering Information

 

 Model  Description  Size(mm)  Package  Weight/carton
 SPFC-PH-24M-4/4E  Fiber Closure Horizontal type support Splitter 24 Cores Max , 24 Cores Splice   Tray 4 IN 4 OUT Mechanical Splicing without Splitter,support 1:16/1:8(2PCS)   Max type E

 470*240*120

500*510*58/8PCS

 

 28.5KG/8PCS

 

 SPFC-PH-36M-4/4E  Fiber Closure Horizontal type support Splitter 36 Cores Max , 24 Cores Splice   Tray 4 IN 4 OUT Mechanical Splicing without Splitter,support   1:32/1:16(2PCS)   Max type E
 SPFC-PH-48M-4/4E  Fiber Closure Horizontal type support Splitter 48cores(24 duplex SC adapters   can  be   installed) 24 Cores Splice Tray 4 IN 4 OUT Mechanical Splicing without   Splitter,support 1:32/1:16(2PCS) Max type E
 

Get in touch with us

Enter Your Message

You Might Be Into These