Single +3.3 V 10gb SFP+ Transceiver , XFP Fiber Transceiver Module Duplex LC Interface

Product Description

10G DWDM SFP+/XFP Fiber Optic Transceiver up to 80km over SMF with Duplex LC Interface

10G DWDM SFP+/XFP Transceivers are specifically designed for carriers and large enterprises that require a scalable, flexible, cost-effective system for multiplexing, transporting and protecting high-speed data, storage, voice and video applications in point-to-point, add/drop, ring, mesh and star network topologies. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

Features

● Single +3.3 V Power Supply

● Support 9.95 Gbps to 11.1Gbps

● DWDM TUNABLE laser optional

● Built-in digital diagnostic functions

● Transmission distance up to 80km over SMF

● Temperature-stabilized DWDM EML Transmitter

● Can be used with single fiber DWDM system and dual fiber DWDM system

● Available in all C-Band Wavelengths on the 100GHz or 50GHz DWDM ITU Grid

● Operating Case Temperature: Standard: 0~70°C; Extended: -20~85°C; Industrial: -40~85°C

Complaint

● RoHS-6

● SFP+/XFP MSA

● OC-192 / SDH STM LR2

● IEEE 802.3ae 10GBASE-ZR and 10GBASE-ER

● SFF-8431 ,SFF-8432 ,SFF-8436 and SFF-8472

Sopto fiber optic transceiver took the first lead to pass the ISO9001 quality system, the requirements of European CE, RoHs

Pin Assignment

Diagram of Host Board Connector Block Pin Numbers and Name.

Pin Function Descriptions

Note:

1. The module ground pins shall be isolated from the module case.

2. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board.

3. This pin shall be pulled up with 4.7K-10Kohms to VccT in the module.

4. This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board.

SFP Module EEPROM Information and Management

The SFP modules implement the 2-wire serial communication protocol as defined in the SFP -8472. The serial ID information of the SFP modules and Digital Diagnostic Monitor parameters can be accessed through the I2C interface at address A0h and A2h. The memory is mapped in Table 1. Detailed ID information (A0h) is listed in Table 2. And the DDM specification at address A2h. For more details of the memory map and byte definitions, please refer to the SFF-8472, “Digital Diagnostic Monitoring Interface for Optical Transceivers”. The DDM parameters have been internally calibrated.

Table 1: Digital Diagnostic Memory Map (Specific Data Field Descriptions)

Table 2:EEPROM Serial ID Memory Contents (A0h)

Recommended Host Board Power Supply Circuit

Recommended High-speed Interface Circuit

Mechanical Dimensions

All optical transceivers are RoHS compliant and could be 100% compatible with branding equipment, such as Cisco, Extreme, Juniper, HP, H3C, Linksys, Huawei, Alcatel-Lucent, Foundry, Nortel, Force10 etc.

If you want to know more about the exact information of the specified transceiver or get price, Please Contact Us>>.

Ordering Information

Note: XX = 17~61 (ITU Channel C-band)